upgrade = downgrade?

Do you need help? Ask here!

Bug reporting belongs here: http://developer.wz2100.net/newticket
User avatar
psychopompos
Trained
Trained
Posts: 470
Joined: 08 Nov 2007, 09:18
Location: UK

upgrade = downgrade?

Post by psychopompos »

couple of days ago i killed my g3 card, and ended up using the SiS 661fx again, which actually played the campaign 1 missions quite well (though no fog & with --noshadow), even tried it at 1600x res, though after 10 mins it dropped to windows lacking video memory to create new surface or something.

this morning, i bought & installed a gig stick of ram & an ATI radeon 9250.
well, now im getting a burst of about 4 frames every 8 to 10 seconds when i try to play wz.
MOTHERBOARD - MSI P7N PLATINUM¦-¦PROCESSOR - C2D E7300 @ 4.00GHZ
MEMORY - 4 Gig (2x2gig) ddr2 1066mhz¦-¦OPERATING SYSTEM - WINDOWS 7 (ULT)
GRAPHICS - BFG GTX 260 OCX (requires ForceWare drivers for good openGL)
User avatar
DevUrandom
Regular
Regular
Posts: 1690
Joined: 31 Jul 2006, 23:14

Re: upgrade = downgrade?

Post by DevUrandom »

Giel wrote: If you are using ATI graphics cards and experience bad performance, please try the fixed exe instead, which has a workaround for ATI drivers switching into software mode!
User avatar
psychopompos
Trained
Trained
Posts: 470
Joined: 08 Nov 2007, 09:18
Location: UK

Re: upgrade = downgrade?

Post by psychopompos »

ah cheers.(just my luck to pick up a mule)

working much smoother now.
though does this exe need different instructions for "--fullscreen"?
as it comes up behind the taskber as if windowed(can be clicked away), and doesnt fit to the bottom or right edge of the screen.

Image
MOTHERBOARD - MSI P7N PLATINUM¦-¦PROCESSOR - C2D E7300 @ 4.00GHZ
MEMORY - 4 Gig (2x2gig) ddr2 1066mhz¦-¦OPERATING SYSTEM - WINDOWS 7 (ULT)
GRAPHICS - BFG GTX 260 OCX (requires ForceWare drivers for good openGL)
User avatar
DevUrandom
Regular
Regular
Posts: 1690
Joined: 31 Jul 2006, 23:14

Re: upgrade = downgrade?

Post by DevUrandom »

Looks odd...
You could check ~/My Documents/Warzone 2100/config and see if "fullscreen=1". Also check whether "width" and "height" are correct.
User avatar
psychopompos
Trained
Trained
Posts: 470
Joined: 08 Nov 2007, 09:18
Location: UK

Re: upgrade = downgrade?

Post by psychopompos »

1280x1024 on the card, 1280x1024 in the shortcut. same problem at 1024x768(wider gap on right though)

"/My Documents/Warzone 2100/config" has no "screen" let alone "fullscreen=1"

should i add it?
does it matter what order it is in?
MOTHERBOARD - MSI P7N PLATINUM¦-¦PROCESSOR - C2D E7300 @ 4.00GHZ
MEMORY - 4 Gig (2x2gig) ddr2 1066mhz¦-¦OPERATING SYSTEM - WINDOWS 7 (ULT)
GRAPHICS - BFG GTX 260 OCX (requires ForceWare drivers for good openGL)
User avatar
DevUrandom
Regular
Regular
Posts: 1690
Joined: 31 Jul 2006, 23:14

Re: upgrade = downgrade?

Post by DevUrandom »

That fullscreen is missing in it is somehow weird... Warzone should create it if it is missing... If you add it, it may very well be that it gets removed the next time you start Warzone...
User avatar
psychopompos
Trained
Trained
Posts: 470
Joined: 08 Nov 2007, 09:18
Location: UK

Re: upgrade = downgrade?

Post by psychopompos »

actually, it seems to have stuck.
the window is about 1.2mm from the right side, and the taskbar is still in front at launch.

the taskbar being in front makes me think, this fixed.exe isnt communicating that its fullscreen the same as the normal .exe.
unless its something in my rig that isnt listening right...
MOTHERBOARD - MSI P7N PLATINUM¦-¦PROCESSOR - C2D E7300 @ 4.00GHZ
MEMORY - 4 Gig (2x2gig) ddr2 1066mhz¦-¦OPERATING SYSTEM - WINDOWS 7 (ULT)
GRAPHICS - BFG GTX 260 OCX (requires ForceWare drivers for good openGL)