Will there be a new version with updated graphics, etc?

lav_coyote25 · Post by **lav_coyote25** » 01 Aug 2009, 23:38

12valve wrote:Do you need help modeling new vehicles and weapons?

yes , oui, ya, affirmative!!!!

xD

12valve · Post by **12valve** » 03 Aug 2009, 04:03

Well, where do I start? lol

lav_coyote25 · Post by **lav_coyote25** » 04 Aug 2009, 05:22

pick something old - and make an updated version or make the next version in line... however you want.

hawkn · Post by **hawkn** » 05 Aug 2009, 00:22

what design engine do you guys use? i just have the freeware version of gmax. i could create some more basic items (i think)

Crushy · Post by **Crushy** » 05 Aug 2009, 07:20

I know one guy has been using blender. I've been trying to learn it but I can't find a decent vehicle tutorial

Everything seems so overwhelmingly complicated...

hawkn · Post by **hawkn** » 06 Aug 2009, 00:40

is blender free? i'm currently saving for a computer, and i dont have much money to spend. (the computer i want will be around 3 grand)

XANAX · Post by **XANAX** » 06 Aug 2009, 00:48

hawkn wrote:is blender free? i'm currently saving for a computer, and i dont have much money to spend. (the computer i want will be around 3 grand)

yes it's free

Post by **Zarel** » 06 Aug 2009, 01:10

hawkn wrote:i'm currently saving for a computer, and i dont have much money to spend. (the computer i want will be around 3 grand)

Lies. There are no good computers that cost more than $1000, unless it's a laptop, in which case there are no good computers that cost more than $2000. If it's more expensive, you're getting ripped off.

hawkn · Post by **hawkn** » 06 Aug 2009, 01:35

Nah i'm paying for the extra hardrive and ram slots, and the processors. It's got like 6 gigs of ddr3 ram, and two video cards with 500 megs of dedicated ram.
On a side note anyone know where i can download the blender tutorials? i can only go online from 3-5pm (cyber sitter)...

Post by **Zarel** » 06 Aug 2009, 02:50

hawkn wrote:Nah i'm paying for the extra hardrive and ram slots, and the processors. It's got like 6 gigs of ddr3 ram, and two video cards with 500 megs of dedicated ram.
On a side note anyone know where i can download the blender tutorials? i can only go online from 3-5pm (cyber sitter)...

2GB stick of DDR3 RAM are worth $33.
Your average video card with 512MB VRAM is worth around $90 each.

So that's, what, $280 right there?

Add a mobo for $100, an i7 for $300, a case for $100, a PSU for $100, and that's, what, $880?

And you don't think $3000 is overpriced for this? o_O

Post by **stiv** » 06 Aug 2009, 03:45

True, the price of hardware has been dropping, but better to buy a machine that meets your needs than purchase a suck-ass on-board video chipset that will only bring you grief and forum-whining. You get what you pay for.

Lots of Blender informational goodness here:

http://wiki.blender.org/index.php/Main_Page

Thyranim · Post by **Thyranim** » 06 Aug 2009, 08:49

Zarel wrote:2GB stick of DDR3 RAM are worth $33.
Your average video card with 512MB VRAM is worth around $90 each.

So that's, what, $280 right there?

Add a mobo for $100, an i7 for $300, a case for $100, a PSU for $100, and that's, what, $880?

And you don't think $3000 is overpriced for this? o_O

i've mixed some componentes and get a high-end pc for 2000 EUR (don't know the course for USD)
Asus P6T, Intel i7-950, 12 GB RAM, Cooler Master Cosmos Case, Tagan T780 PSU, 2x Palit 2GB GTX285, 3x 1TB WD-HDD

but don't know how to get the 3000 ... ^^ or perhaps it still is 3000 USD ?

Post by **Zarel** » 06 Aug 2009, 09:39

Thyranim wrote:i've mixed some componentes and get a high-end pc for 2000 EUR (don't know the course for USD)
Asus P6T, Intel i7-950, 12 GB RAM, Cooler Master Cosmos Case, Tagan T780 PSU, 2x Palit 2GB GTX285, 3x 1TB WD-HDD

but don't know how to get the 3000 ... ^^ or perhaps it still is 3000 USD ?

Yeah, 2000 euros is around 2900 USD.

Then again, 12 GB of RAM and two dedi 2GB video cards is a lot higher specced than what hawkn was talking about, and Europe's electronics are significantly more expensive than US electronics anyway. In the US, any desktop costing more than $1000 simply isn't worth its price.

G0rz · Post by **G0rz** » 06 Aug 2009, 10:59

Thyranim wrote:
i've mixed some componentes and get a high-end pc for 2000 EUR (don't know the course for USD)
Asus P6T, Intel i7-950, 12 GB RAM, Cooler Master Cosmos Case, Tagan T780 PSU, 2x Palit 2GB GTX285, 3x 1TB WD-HDD

but don't know how to get the 3000 ... ^^ or perhaps it still is 3000 USD ?

um, wow, I don't think I would ever need that much stuff in a computer... Mind you back in the day, people though a gig would be all they ever needed...

Cheers,
G0rz

Thyranim · Post by **Thyranim** » 06 Aug 2009, 11:27

it's not ment as a "must have". i only tried to show, what a machine you'll be able to get for 3000 USD.
hawkn wants to get a machine with less than i've mixed up, so he'll never need so much money for his machine

Warzone 2100 Forums

Will there be a new version with updated graphics, etc?

Re: Will there be a new version with updated graphics, etc?

Re: Will there be a new version with updated graphics, etc?

Re: Will there be a new version with updated graphics, etc?

Re: Will there be a new version with updated graphics, etc?

Re: Will there be a new version with updated graphics, etc?

Re: Will there be a new version with updated graphics, etc?

Re: Will there be a new version with updated graphics, etc?

Re: Will there be a new version with updated graphics, etc?

Re: Will there be a new version with updated graphics, etc?

Re: Will there be a new version with updated graphics, etc?

Re: Will there be a new version with updated graphics, etc?

Re: Will there be a new version with updated graphics, etc?

Re: Will there be a new version with updated graphics, etc?

Re: Will there be a new version with updated graphics, etc?

Re: Will there be a new version with updated graphics, etc?