Asign

[A4tech]

HOW can I asign turets to sensor tower? How can I do this operation?
Please step-by-step  ::)

Thank you  ;D

[doom3r]

You can assign units only to sensor turrets, not towers. To do that, just select the unit you want to assign then left-click on the sensor turret unit. Regarding sensor towers, only artillery emplacements can be assigned to them, not mobile units. Every artillery piece will automatically assign to the nearest tower.

[ouch]

don't forget commanders can redirect, artillery instalations weapon systems on to the target of your chooseing...

[lav_coyote25]

You can assign units only to sensor turrets, not towers. To do that, just select the unit you want to assign then left-click on the sensor turret unit. Regarding sensor towers, only artillery emplacements can be assigned to them, not mobile units. Every artillery piece will automatically assign to the nearest tower.

wrong!  you can assign UNITS to sensor towers... unless the devs have disabled it.    try it.  assign mortar or howitzer type  units  (dont forget to assign a number to em first) to a sensor tower... if that sensor tower is close to the units that were assigned to it...they will pretty much not move... if you assign them to a sensor tower that is on the opposite side a good deal of distance away (mortars only-usually)  the units will go close to that sensor ( give or take a few tiles distance away.) 

note: assign ground shaker tracks on any heavy body to the Counter Battery (CB ) tower... and the next time one of your enemies target any of your stuff... they will get an unusual amount of heavy metal flying in a very tight grouping upon their pointy little heads.

you really should read the manual. ;D  pages 24 and 25...

http://docs.wz2100.net/manual/page24.html

[marcmad]

you can assign  angel and archangel missile too.
I think you can assign all who have more than 2000 range.(safe needle gun,rail gun, gauss cannon etc,.)