Delphinio thanx for the info! as I had already nice idea for a map damn scripts but wait.. is it difficult (for a person like I am) to set those artefacts?
And yet another question, this time about features, all cars, this broken tanker, pick up, van and so on, they belong to arizona and arizona only yes? because I remember one of them is somehow blue and I was always afraid it has this inappropriate tileset blue syndrome..
I do ask for answet to all my questions, and I thank in advance
“Beneath this mask there is more than flesh. Beneath this mask there is an idea, and ideas are bulletproof.” - V
"Mark my words boy, Mark them well, I have survived your predecessors and I will survive you." - Merovingian
Merowingg wrote:Delphinio thanx for the info! as I had already nice idea for a map damn scripts but wait.. is it difficult (for a person like I am) to set those artefacts?
Yet another question.. what is the minimum limit of a structure being built on a map? for oil we can place it on the forth tile from the edge yes? (if no correct me please) then if a sensor tower is placed on third tile from the edge will it work correctly? will it work at all?
I am sorry to sort spam here.. please do not omit any of my questions in the earlier posts.. and dont kill me..
“Beneath this mask there is more than flesh. Beneath this mask there is an idea, and ideas are bulletproof.” - V
"Mark my words boy, Mark them well, I have survived your predecessors and I will survive you." - Merovingian
Structures cannot be placed on 3 tiles at the left and at the top and on 4 tiles at the right and at the bottom. Note: you must consider this lack of symmetry if you want to make an actually symmetric map.
Units cannot move through the last row on any side. In this sense, no completely symmetric map can be made, but unit movement area is usually less interesting than buildable area.
If you put structures too close to the edge, you won't be able to rebuild them. If you place oils too close, you won't be able to build derricks.
NoQ download please 4c-DuneZone2x2DR from addons, and look at the corners.. are those radars ok? I have so weak interent that I wast able to upload the screen
And where is Flail, Sir I need you with my 99 questions
“Beneath this mask there is more than flesh. Beneath this mask there is an idea, and ideas are bulletproof.” - V
"Mark my words boy, Mark them well, I have survived your predecessors and I will survive you." - Merovingian
I have a problem with the textures of design, I do not appear
The Arizona and Rocky Mountains textures do not appear
I need a recommendation,help please.
lo siento por mi mala ingles
You do not have the required permissions to view the files attached to this post.
México - Español/Ingles un poco- -También conocido por "RaNgEl"☜ ☆ ☞ Luis Diego Rangel☜ ☆ ☞ ♪♪♫ ♫
never got flame mono to work under fedora any ideas?
those versions are installed:
Name : mono-basic
Arch : x86_64
Version : 2.10
Name : mono-data
Arch : x86_64
Version : 2.10.8
Name : mono-core
Arch : i686
Version : 2.10.8
FlaME 1.25$ mono FlaME.exe
Gtk-Message: Failed to load module "pk-gtk-module"
X11 Error encountered:
Error: BadMatch (invalid parameter attributes)
Request: 135 (5)
Resource ID: 0x2E00013
Serial: 211
Hwnd: Hwnd, Mapped:False ClientWindow:0x2E00013, WholeWindow:0x2E00012, Zombie=False, Parent:[<null>]
Control: OpenTK.GLControl at System.Environment.get_StackTrace()
at System.Windows.Forms.XplatUIX11.HandleError(IntPtr display, XErrorEvent ByRef error_event)
at OpenTK.Platform.X11.Glx.MakeCurrent(IntPtr , IntPtr , IntPtr )
at OpenTK.Platform.X11.Glx.MakeCurrent(IntPtr display, IntPtr drawable, ContextHandle context)
at OpenTK.Platform.X11.X11GLContext.MakeCurrent(IWindowInfo window)
at OpenTK.Graphics.GraphicsContext.MakeCurrent(IWindowInfo window)
at OpenTK.GLControl.MakeCurrent()
at OpenTK.GLControl.OnHandleCreated(System.EventArgs e)
at System.Windows.Forms.Control.WmCreate(Message ByRef m)
at System.Windows.Forms.Control.WndProc(Message ByRef m)
at System.Windows.Forms.ScrollableControl.WndProc(Message ByRef m)
at System.Windows.Forms.ContainerControl.WndProc(Message ByRef m)
at System.Windows.Forms.UserControl.WndProc(Message ByRef m)
at System.Windows.Forms.Control+ControlWindowTarget.OnMessage(Message ByRef m)
at System.Windows.Forms.Control+ControlNativeWindow.WndProc(Message ByRef m)
at System.Windows.Forms.NativeWindow.WndProc(IntPtr hWnd, Msg msg, IntPtr wParam, IntPtr lParam)
at System.Windows.Forms.XplatUIX11.SendMessage(IntPtr hwnd, Msg message, IntPtr wParam, IntPtr lParam)
at System.Windows.Forms.XplatUIX11.CreateWindow(System.Windows.Forms.CreateParams cp)
at System.Windows.Forms.XplatUI.CreateWindow(System.Windows.Forms.CreateParams cp)
at System.Windows.Forms.NativeWindow.CreateHandle(System.Windows.Forms.CreateParams cp)
at System.Windows.Forms.Control.CreateHandle()
at System.Windows.Forms.Control.CreateControl()
at OpenTK.GLControl.ValidateState()
at OpenTK.GLControl.MakeCurrent()
at FlaME.ctrlMapView..ctor(FlaME.frmMain Owner)
at FlaME.frmMain..ctor()
at FlaME.modProgram..cctor()
at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.OnRun()
at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.Run(System.String[] commandLine)
at FlaME.My.MyApplication.Main(System.String[] Args)
OpenTK.Graphics.GraphicsContextException: Failed to make context current.
at OpenTK.Platform.X11.X11GLContext.MakeCurrent (IWindowInfo window) [0x00000] in <filename unknown>:0
at OpenTK.Graphics.GraphicsContext.MakeCurrent (IWindowInfo window) [0x00000] in <filename unknown>:0
at OpenTK.GLControl.MakeCurrent () [0x00000] in <filename unknown>:0
at OpenTK.GLControl.OnHandleCreated (System.EventArgs e) [0x00000] in <filename unknown>:0
at System.Windows.Forms.Control.WmCreate (System.Windows.Forms.Message& m) [0x00000] in <filename unknown>:0
at System.Windows.Forms.Control.WndProc (System.Windows.Forms.Message& m) [0x00000] in <filename unknown>:0
at System.Windows.Forms.ScrollableControl.WndProc (System.Windows.Forms.Message& m) [0x00000] in <filename unknown>:0
at System.Windows.Forms.ContainerControl.WndProc (System.Windows.Forms.Message& m) [0x00000] in <filename unknown>:0
at System.Windows.Forms.UserControl.WndProc (System.Windows.Forms.Message& m) [0x00000] in <filename unknown>:0
at System.Windows.Forms.Control+ControlWindowTarget.OnMessage (System.Windows.Forms.Message& m) [0x00000] in <filename unknown>:0
at System.Windows.Forms.Control+ControlNativeWindow.WndProc (System.Windows.Forms.Message& m) [0x00000] in <filename unknown>:0
at System.Windows.Forms.NativeWindow.WndProc (IntPtr hWnd, Msg msg, IntPtr wParam, IntPtr lParam) [0x00000] in <filename unknown>:0
X11 Error encountered:
Error: BadMatch (invalid parameter attributes)
Request: 135 (5)
Resource ID: 0x2E00013
Serial: 228
Hwnd: Hwnd, Mapped:True ClientWindow:0x2E00013, WholeWindow:0x2E00012, Zombie=False, Parent:[<null>]
Control: OpenTK.GLControl at System.Environment.get_StackTrace()
at System.Windows.Forms.XplatUIX11.HandleError(IntPtr display, XErrorEvent ByRef error_event)
at OpenTK.Platform.X11.Glx.MakeCurrent(IntPtr , IntPtr , IntPtr )
at OpenTK.Platform.X11.Glx.MakeCurrent(IntPtr display, IntPtr drawable, ContextHandle context)
at OpenTK.Platform.X11.X11GLContext.MakeCurrent(IWindowInfo window)
at OpenTK.Graphics.GraphicsContext.MakeCurrent(IWindowInfo window)
at OpenTK.GLControl.MakeCurrent()
at FlaME.ctrlMapView..ctor(FlaME.frmMain Owner)
at FlaME.frmMain..ctor()
at FlaME.modProgram..cctor()
at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.OnRun()
at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.Run(System.String[] commandLine)
at FlaME.My.MyApplication.Main(System.String[] Args)
Any body still have the MediaFire dl links for the .exe and data? These new ones ain't working for me on my Android Tab. First time I've ever had this come up.
This doesn't initiate the dl - does zilch in this OS.