I've updated the guide to what we currently have in trunk. I hope that helps. If not, ask again.HolyDragoon wrote:So, I'm trying to compile the source files in Windows XP, but I don't understand the "Setting things up to get ready for compiling" part of this page: http://wiki.wz2100.net/Windows_Compile_ ... 28MinGW%29. Can somebody shed some light on me? I understand the part of using the command line, but the beginning eludes me a little...
Code: Select all
C:\cmp>mingw32-make -f Makefile.raw
mingw32-make: Makefile.raw: No such file or directory
mingw32-make: *** No rule to make target `Makefile.raw'. Stop.Code: Select all
C:\cmp>mingw32-make -f Makefile.win32
Checking config...
PACKAGE_VERSION := TRUNK
MODE := debug
DEVDIR := C:/devpkg
Config seems valid.
mingw32-make[1]: Entering directory `C:/cmp/build_tools'
mingw32-make[1]: makefile.raw: No such file or directory
mingw32-make[1]: *** No rule to make target `makefile.raw'. Stop.
mingw32-make[1]: Leaving directory `C:/cmp/build_tools'
mingw32-make: *** [build_tools] Error 2My mistake, sorry.HolyDragoon wrote:Same error, but this time it begins to run.
Why does it keep pointing to makefile.raw? Was it suppposed to point there, or should it point to makefile.win32?Code: Select all
C:\cmp>mingw32-make -f Makefile.win32 Checking config... PACKAGE_VERSION := TRUNK MODE := debug DEVDIR := C:/devpkg Config seems valid. mingw32-make[1]: Entering directory `C:/cmp/build_tools' mingw32-make[1]: makefile.raw: No such file or directory mingw32-make[1]: *** No rule to make target `makefile.raw'. Stop. mingw32-make[1]: Leaving directory `C:/cmp/build_tools' mingw32-make: *** [build_tools] Error 2
Code: Select all
C:\cmp>mingw32-make -f makefile.win32
Checking config...
PACKAGE_VERSION := TRUNK
MODE := debug
DEVDIR := C:/devpkg
Config seems valid.
mingw32-make[1]: Entering directory `C:/cmp/build_tools'
mingw32-make[2]: Entering directory `C:/cmp/build_tools/autorevision'
makefile.win32:29: warning: overriding commands for target `clean'
../.././makerules/exe.mk:13: warning: ignoring old commands for target `clean'
g++ -std=gnu99 -g -O0 -Wall -Werror-implicit-function-declaration -o autorevis
ion autorevision.o
autorevision +cstr -v ..\\..\\. ..\\..\\.\\src\\autorevision.h
[u]'svnversion' não é reconhecido como um comando interno ou externo,
programa operacional ou ficheiro batch.
'svn' não é reconhecido como um comando interno ou externo,
programa operacional ou ficheiro batch.
'git-svn' não é reconhecido como um comando interno ou externo,
programa operacional ou ficheiro batch.
'git-rev-list' não é reconhecido como um comando interno ou externo,
programa operacional ou ficheiro batch.[/u]
Revision unchanged (5459). Skipping.
old = "5459"; new = "5459"
mingw32-make[2]: Leaving directory `C:/cmp/build_tools/autorevision'
mingw32-make[1]: Leaving directory `C:/cmp/build_tools'
mingw32-make[1]: Entering directory `C:/cmp/po'
mingw32-make[1]: Nothing to be done for `all'.
mingw32-make[1]: Leaving directory `C:/cmp/po'
mingw32-make[1]: Entering directory `C:/cmp/win32'
del /F warzone2100.o
Não foi possível localizar C:\cmp\win32\warzone2100.o
mingw32-make[1]: Leaving directory `C:/cmp/win32'
mingw32-make[1]: Entering directory `C:/cmp/lib'
mingw32-make[2]: Entering directory `C:/cmp/lib/framework'
mingw32-gcc -I../../. -DPACKAGE=\"warzone2100\" -DPACKAGE_VERSION=\"TRUNK\" -DYY
_STATIC -IC:/devpkg/include/SDL -IC:/devpkg/include/libpng12 -IC:/devpkg/include
/bfd -IC:/devpkg/include -DDEBUG -DWIN32 -std=gnu99 -g -O0 -Wall -Werror-implic
it-function-declaration -mwindows -c -o configfile.o configfile.c
In file included from frame.h:33,
from configfile.c:21:
types.h:38:23: SDL_types.h: No such file or directory
In file included from frame.h:45,
from configfile.c:21:
cursors.h:27:23: SDL_mouse.h: No such file or directory
In file included from frame.h:45,
from configfile.c:21:
cursors.h:67: error: syntax error before '*' token
cursors.h:67: warning: type defaults to `int' in declaration of `init_system_cur
sor'
cursors.h:67: warning: data definition has no type or storage class
cursors.h:68: error: syntax error before '*' token
cursors.h:68: warning: type defaults to `int' in declaration of `init_system_cur
sor16'
cursors.h:68: warning: data definition has no type or storage class
cursors.h:69: error: syntax error before '*' token
cursors.h:69: warning: type defaults to `int' in declaration of `init_system_cur
sor32'
cursors.h:69: warning: data definition has no type or storage class
In file included from configfile.c:26:
file.h:22:20: physfs.h: No such file or directory
In file included from configfile.c:26:
file.h:25: error: syntax error before '*' token
file.h:25: warning: type defaults to `int' in declaration of `openLoadFile'
file.h:25: warning: data definition has no type or storage class
file.h:28: error: syntax error before '*' token
file.h:28: warning: type defaults to `int' in declaration of `openSaveFile'
file.h:28: warning: data definition has no type or storage class
configfile.c: In function `registry_load':
configfile.c:183: error: implicit declaration of function `PHYSFS_exists'
configfile.c:212: error: implicit declaration of function `sscanf'
configfile.c: In function `registry_save':
configfile.c:247: error: implicit declaration of function `snprintf'
mingw32-make[2]: *** [configfile.o] Error 1
mingw32-make[2]: Leaving directory `C:/cmp/lib/framework'
mingw32-make[1]: *** [framework] Error 2
mingw32-make[1]: Leaving directory `C:/cmp/lib'
mingw32-make: *** [lib] Error 2
Code: Select all
flex -o resource_lexer.lex.c resource_lexer.l
flex: can't open resource_lexer.lex.c
mingw32-make[2]: *** [resource_lexer.lex.c] Error 1
rm resource_parser.tab.c
mingw32-make[2]: Leaving directory `C:/cmp/lib/framework'
mingw32-make[1]: *** [framework] Error 2
mingw32-make[1]: Leaving directory `C:/cmp/lib'
mingw32-make: *** [lib] Error 2cybersphinx wrote:The stuff between the s doesn't matter, but you're missing the SDL includes (aren't those in the dev-package?).
Code: Select all
mingw32-ar rcv ..\\..\\.\\lib\\libframework.a configfile.o cursors.o cursors16.
cursors32.o debug.o frame.o frameresource.o input.o i18n.o lexer_input.o print
_ext.o resource_parser.tab.o resource_lexer.lex.o strnlen1.o strres.o strres_pa
ser.tab.o strres_lexer.lex.o tagfile.o treap.o trig.o SDL_framerate.o
process_begin: CreateProcess(NULL, mingw32-ar rcv ..\..\.\lib\libframework.a co
figfile.o cursors.o cursors16.o cursors32.o debug.o frame.o frameresource.o inp
t.o i18n.o lexer_input.o printf_ext.o resource_parser.tab.o resource_lexer.lex.
strnlen1.o strres.o strres_parser.tab.o strres_lexer.lex.o tagfile.o treap.o t
ig.o SDL_framerate.o, ...) failed.
make (e=2): O sistema nÒo conseguiu localizar o ficheiro especificado.
mingw32-make[2]: *** [../.././lib/libframework.a] Error 2
mingw32-make[2]: Leaving directory `C:/cmp/lib/framework'
mingw32-make[1]: *** [framework] Error 2
mingw32-make[1]: Leaving directory `C:/cmp/lib'
mingw32-make: *** [lib] Error 2
Code: Select all
C:\MinGW\bin\..\lib\gcc\mingw32\3.4.5\..\..\..\..\mingw32\bin\ld.exe: cannot fin
d -lGLU
collect2: ld returned 1 exit status
mingw32-make[1]: *** [warzone2100.exe] Error 1
mingw32-make[1]: Leaving directory `C:/cmp/src'
mingw32-make: *** [src] Error 2Did you install the correct libs ? GLU should have been part of the mingw/msys package.HolyDragoon wrote:Another error...
Also, the folders now show a little symbol, like a tick in almost all folders, but the makrules foloder has an exclamation mark.Code: Select all
C:\MinGW\bin\..\lib\gcc\mingw32\3.4.5\..\..\..\..\mingw32\bin\ld.exe: cannot fin d -lGLU collect2: ld returned 1 exit status mingw32-make[1]: *** [warzone2100.exe] Error 1 mingw32-make[1]: Leaving directory `C:/cmp/src' mingw32-make: *** [src] Error 2