According to configuration it was disabled in both backends.Safety0ff wrote:If vsync state is different between the two then I would expect a difference in cpu usage (especially since wz rendering is cpu heavy,) there's a patch in the pipes (#3054) to make vsync work equivalently between sdl and qt.
New master snapshot 20120109 has been released!
Re: New master snapshot 20120109 has been released!
Nadszedł już czas, najwyższy czas, nienawiść zniszczyć w sobie.
The time has come, the high time, to destroy hatred in oneself.
Beware! Mad Qt Evangelist.
The time has come, the high time, to destroy hatred in oneself.
Beware! Mad Qt Evangelist.
Re: New master snapshot 20120109 has been released!
@Navvarr Skirmish crashes for me as well same errors.
-
- Trained
- Posts: 86
- Joined: 10 May 2011, 19:21
Re: New master snapshot 20120109 has been released!
been a while since I last posted here, I tried playing the campaign using the latest master snapshot, but encountered a strange issue, I tried to go through some posts and searched the bug tracker, anyway the issue is the following,
I can confirm this issue with skirmish and campaign, once I got a commander unit, ans assigned units to the commander, as soon as I save and reload, then check the commander units total, it upon loading, even though the units themselves remain assigned to the commander, however the unit total from the commander status button, keeps reverting back to 1, so if I have 6 units assigned, save then load, that number reverts to 1 ever time, of course to solve this issue, I have to unassigned the units and reassign them, but that is getting annoying, especailly in the campaign missions and a tight timelimits, haven't tested the 2.3.9 version but I probably will soon, wondering if anyone else has encountered this issue and if there is a bug report or a known issue about this?
and the other issue I'm seeing and I think there is a bug report about this, that units if built on an away mission aren't where they should be, unless you bring them to the away mission, but the units can still be accessed for reinforcements at a later date
but apart from that, the master plays just fine
I can confirm this issue with skirmish and campaign, once I got a commander unit, ans assigned units to the commander, as soon as I save and reload, then check the commander units total, it upon loading, even though the units themselves remain assigned to the commander, however the unit total from the commander status button, keeps reverting back to 1, so if I have 6 units assigned, save then load, that number reverts to 1 ever time, of course to solve this issue, I have to unassigned the units and reassign them, but that is getting annoying, especailly in the campaign missions and a tight timelimits, haven't tested the 2.3.9 version but I probably will soon, wondering if anyone else has encountered this issue and if there is a bug report or a known issue about this?
and the other issue I'm seeing and I think there is a bug report about this, that units if built on an away mission aren't where they should be, unless you bring them to the away mission, but the units can still be accessed for reinforcements at a later date
but apart from that, the master plays just fine
Re: New master snapshot 20120109 has been released!
Yes, I've seen that too (wrong amount of assigned units) and as far as I know there is currently no ticket for that.
The latter issue, I've seen only this.
The latter issue, I've seen only this.
Nadszedł już czas, najwyższy czas, nienawiść zniszczyć w sobie.
The time has come, the high time, to destroy hatred in oneself.
Beware! Mad Qt Evangelist.
The time has come, the high time, to destroy hatred in oneself.
Beware! Mad Qt Evangelist.
-
- Trained
- Posts: 86
- Joined: 10 May 2011, 19:21
Re: New master snapshot 20120109 has been released!
I will add a ticket for the first issue, the second issue sounds pretty much what Im seeing, only the trucks were visible, I built 10 mortars when I had access to mortar tech, and those units were not visible on the map at all, even when I enabled the health bars,
PS I checked the 2.3.9 build and do not see the first issue with this build, only the master snapshot,
but I will add a ticket for the first issue, if you seen this too, it should be reported and I will do that now,
PS I checked the 2.3.9 build and do not see the first issue with this build, only the master snapshot,
but I will add a ticket for the first issue, if you seen this too, it should be reported and I will do that now,
Re: New master snapshot 20120109 has been released!
It was reported on IRC, thanks to this I know that commanders code is ugly.
Nadszedł już czas, najwyższy czas, nienawiść zniszczyć w sobie.
The time has come, the high time, to destroy hatred in oneself.
Beware! Mad Qt Evangelist.
The time has come, the high time, to destroy hatred in oneself.
Beware! Mad Qt Evangelist.
-
- Trained
- Posts: 86
- Joined: 10 May 2011, 19:21
Re: New master snapshot 20120109 has been released!
I have reported it in the tracker but missed modifying the component, and I can't seem to edit the ticket to change it
http://developer.wz2100.net/ticket/3062 ... dd-comment
but anyway, hope its enough
edit
I have replied to your question regarding adding units beyond the means of the commander, this is possible, as long as you don't remove units, so if your commander can take only 6, save then load, you then can add another six, in my save, the commander has 14 units assigned to it, I can add more units when I load that save, so I can have more units then the commander should be able to have,
http://developer.wz2100.net/ticket/3062 ... dd-comment
but anyway, hope its enough
edit
I have replied to your question regarding adding units beyond the means of the commander, this is possible, as long as you don't remove units, so if your commander can take only 6, save then load, you then can add another six, in my save, the commander has 14 units assigned to it, I can add more units when I load that save, so I can have more units then the commander should be able to have,
Re: New master snapshot 20120109 has been released!
Hi,
just tested several times new snapshot. 4 Player Skirmish
1. Every action taken like selecting a truck, build something or so, there is always a delay before action starts up - not so good.
2. NEXUS AI selected does not show anything for that player (like its not there)
3. Both semperfi AIs play not very good. (Gatways are also not build) Ai from 2.3.9 is much better. Or I am wrong??
Graphics look very very good.
Plz continue with this nice doing. Great.
Good job !!
just tested several times new snapshot. 4 Player Skirmish
1. Every action taken like selecting a truck, build something or so, there is always a delay before action starts up - not so good.
2. NEXUS AI selected does not show anything for that player (like its not there)
3. Both semperfi AIs play not very good. (Gatways are also not build) Ai from 2.3.9 is much better. Or I am wrong??
Graphics look very very good.
Plz continue with this nice doing. Great.
Good job !!
Re: New master snapshot 20120109 has been released!
The Semperfi JS AI is not finished. Do not play it for real.
The other Semperfi does not cheat. Do not judge it badly for it
The other Semperfi does not cheat. Do not judge it badly for it
Re: New master snapshot 20120109 has been released!
developers think that it's okayfraggle wrote:Hi,
just tested several times new snapshot. 4 Player Skirmish
1. Every action taken like selecting a truck, build something or so, there is always a delay before action starts up - not so good.
Please return game timer (showing time of game)
In latest master: in 2.3.9 version
Re: New master snapshot 20120109 has been released!
I know some don't like it's appearance, but it's use is functional for me. It'd be nice to have a toggle for it, like "showfps." Also, having the map name in the screenshot is nice when sharing.
This is why some features aren't implemented: http://forums.wz2100.net/viewtopic.php?f=30&t=7490&view=unread#p87241
- lav_coyote25
- Professional
- Posts: 3434
- Joined: 08 Aug 2006, 23:18
Re: New master snapshot 20120109 has been released!
agreed.effigy wrote:I know some don't like it's appearance, but it's use is functional for me. It'd be nice to have a toggle for it, like "showfps." Also, having the map name in the screenshot is nice when sharing.
- Kih-ap-hiih
- Trained
- Posts: 45
- Joined: 02 May 2010, 18:00
Re: New master snapshot 20120109 has been released!
Removing thinks like that, when we get used to, its spoiling the game.lav_coyote25 wrote:agreed.effigy wrote:I know some don't like it's appearance, but it's use is functional for me. It'd be nice to have a toggle for it, like "showfps." Also, having the map name in the screenshot is nice when sharing.
Re: New master snapshot 20120109 has been released!
Another possibility is that ec053866fe16a8a46288e226aeed2ea00c312533 was applied to 2.3, but never got applied to master (until db3c5b98fac86051697e94c3217063b019aae4c7).
Re: New master snapshot 20120109 has been released!
Most likely, cause timer works fine for me when i get the game from git.
Maps | Tower Defense | NullBot AI | More NullBot AI | Scavs | More Scavs | Tilesets | Walkthrough | JSCam